MICROLITER® 700 Series Syringes, Hamilton

Proveedor: Hamilton
87919 80500 80839 80301 80539 80621 80608 80830 80700 80383 80401 80800 80300 80508 87900 80639 80701 80330 80439 87908 80366 80708 80865 80419 80365 80600 80342 80601 80565 80336 80501 80739 80430 80801 80765 80339 80730 80308 80530 80400 87930 80808 80465 80408 80665 80630
60373-968EA 2065.83 MXN
60373-629 60373-505 60373-946 60373-968 60372-105 10192-148 60372-025 60373-370 60371-000 60371-066 60373-470 60371-044 60371-022 60371-088 60373-471 60373-593 72310-444 60373-375 72310-442 74980-006 74980-002 74980-004 60373-538 60373-957 60373-979 10192-058 10192-054 60373-040 60371-011 10192-056 60373-560 10192-094 10192-072 10118-396 10192-052 60373-061 60373-083 10192-150 60373-323 60373-345 10192-092 60373-028 60372-091 60376-170 72310-434 60373-980
MICROLITER® 700 Series Syringes, Hamilton
Jeringas Jeringas para cromatografía
The 700 series syringe is the original hand-fitted Hamilton syringe

Cemented needles (N) for low volume syringes feature the needles cemented into the glass syringe barrel at a point corresponding to the zero graduation mark. With this termination, dead volume is limited to the internal volume of the needle. Not autoclavable. Needle gauge is determined by the syringe volume and are not user-selectable. Syringe 60373-775 features a special cemented needle (SN) with a termination that is the same as a cemented needle termination, except it allows for a variety of user-defined gauges, lengths, and point styles to be attached. Not autoclavable.

Removable needles (RN) are a Hamilton-specific design. This design allows the needles to seat precisely at the zero graduation mark of the syringe. Users can select the needle gauge, length, and point style to optimize the syringe for custom applications. This termination also allows for a removable needle without increasing the dead volume of the syringe, and is ideal when there is a risk of the needle clogging. Autoclavable when disassembled. Repeated autoclaving will shorten syringe life.

Luer Tip (LT) needles are removable and fit over a ground glass hub which is tapered in the shape of a male luer. This termination will accept most hypodermic needles but was designed specifically for use with Hamilton Kel-F® needles. This termination increases the dead volume in the syringe, which may not be appropriate for some applications. Autoclavable when disassembled to 115°C (239°F).

The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. This series of syringes is ideal for dispensing volumes from 0.5 –500μL. Each syringe is manufactured to achieve the highest level of accuracy and precision possible. Fluid path is SST and borosilicate glass. A variety of different terminations and needle options are available.

Needle Point style 2 is a sharp, beveled, curved, non-coring needle point recommended for septum penetration. Point style 3 is a blunt needle point for use with HPLC injection valves and sample pipetting. Point style 5 is a conical needle with side port for penetration of septa, thin-gauged vinyls, and plastics without coring. Point Style AS is a special conical style needle point used on autosampler syringes. The non-coring needle point is recommended for septum penetration.

Información para pedidos: For additional available needle points, lengths, or gauges, please contact your Avantor representative.
Order Now

Algunos números de catálogo podrían haber cambiado derivado de una estandarización global. Los productos o empaques no están afectados.

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Más About VWR